银杉电源设备(北京)有限公司
主营产品: 蓄电池、锂电池、牵引蓄电池、升降平台电池、太阳能电池、光伏电池、UPS电源、eps蓄电池、柴油发电机电池、直流屏电池、启动电池、进口蓄电池等。
MASTERVOLT充电器PowerCharger 12/40-3
发布时间:2026-01-12

MASTERVOLT充电器PowerCharger 12/40-3

PowerCharger电池充电器

Your introduction to the quality of Mastervolt,  the high performance marine PowerChargers offer you many features in a lightweight, compact design.  PowerCharger battery chargers feature high frequency switch mode technology, which makes them extremely efficient and lightweight.  Designed for worldwide marine applications  (90-265 V AC, 50/60 Hz), they are also power factor corrected (> 0.98).
您对Mastervolt品质的初体验,能船用PowerChargers以轻巧紧凑的设计为您提供诸多功能。PowerCharger电池充电器采用高频开关模式技术,使其极为高效且轻便。专为全球船用应用设计(90-265 V AC,50/60 Hz),并具有功率因数校正功能(> 0.98)。

PowerChargers may be used with lead acid, gel, AGM or spiral batteries and will charge up to 3 battery banks simultaneously.  Their built-in memory functions prevent overcharging.
PowerChargers可用于铅酸电池、凝胶电池、AGM或螺旋电池,并能同时为多达3组电池组充电。其内置记忆功能可防止过度充电。

PowerChargers include an auxiliary power supply  to provide DC voltage even if the batteries are not connected and can revive a ‘dead battery’.  They supply optimal charging in a wide variety of ambient temperatures and feature variable speed fans.  Offering full charging current even with low quality power, they offer no reduction of charging power if input power is low.
PowerChargers包含辅助电源,即使未连接电池也能提供直流电压,并可激活“死电池”。它们在各种环境温度下均能提供充电效果,并配备变速风扇。即使在电源质量较低的情况下,也能提供全额充电电流,输入功率不足时充电功率也不会减弱。

Designed specifically for the marine environment with corrosion-resistant materials, the PowerChargers feature easy-to-read displays and captive screws for ease of installation and operation.  All PowerChargers meet global standards including FCC class B, over temperature, ignition protection, UL, ABYC requirements and are CE certified.
海洋环境设计,采用材料,PowerChargers配备易于读取的显示屏和防脱落螺钉,便于安装和操作。所有PowerChargers均符合包括FCC B级、过热保护、防火保护、UL、ABYC要求在内的标准,并通过CE认证。

The PowerCharger series is not compatible with Mastervolt’s MasterBus network CANbus system.  If you’d like to expand to this system, please use the ChargeMaster series in your application.
PowerCharger系列与Mastervolt的MasterBus网络CANbus系统不兼容。如需扩展到此系统,请在应用中改用ChargeMaster系列。

  • 12 Volt, 20 A and 40 A models
    12伏,20安和40安型号

  • Universal input (90-265 V AC, 50/60 Hz), one charger for domestic and international applications
    通用输入(90-265 V AC,50/60 Hz),一款适用于国内和应用的多性向充电器

  • Fully automatic, multi-stage battery charging of up to 3 battery banks
    全自动多级充电,可支持3个电池组

  • Settings for lead acid, gel, AGM or spiral batteries
    铅酸电池、胶体电池、AGM 电池或螺旋电池的设置

  • Powers your system even without batteries connected
    即使没有连接电池,也能为您的系统供电。

  • Ability to charge a ‘dead battery’
    Ability为‘dead battery’充电

  • Compatible with low-quality power sources, will not decrease charging power
    兼容低质量电源,不会降低充电功率

  • Safety features: Over temp. shutdown, ignition protection, overload protection, surge and short circuit protection
    安全特性:过热关机、点火保护、过载保护、浪涌和短路保护

  • Meets global industry standards including: CE certified, meet ABYC and UL 1236 including marine supplement, ignition-protected, EMC FCC Class B
    符合全球行业标准,包括:CE认证,符合ABYC和UL 1236(含船舶补充标准),具备功能,电磁兼容性满足FCC Class B级要求

  • 2-year warranty2年质保

General specifications一般规格
Nominal output voltage标称输出电压12 V
Total charge current总充电电流40 A
Number of battery outlets
电池插座数量
3
Charge current second output
充电电流第二输出
40 A40
Charge current third output
充电电流第三输出
40 A
Battery bank size电池组尺寸100-450 Ah100-450 安时
Nominal input voltage标称输入电压120/230 V (50/60 Hz)
AC connectionAC连接connector strips连接器条
Power supply mode供电模式yes是
Display/read-out显示/读出LED displayLED显示屏
Fastening紧固with supplied mounting bracket or 4x screw for wall mounting or 4x screw for floor installation
配有安装支架或4x螺丝用于壁挂安装或4x螺丝用于地面安装

Dimensions, hxwxd尺寸,高x宽x深291 x 210 x 131 mm
291 x 210 x 131 毫米
11.5 x 8.3 x 5.2 inch
11.5 x 8.3 x 5.2 英寸

Weight重量4 kg4 千克
8.8 lb8.8磅

Compliance合规CE, E-mark (95/54/EG), SAE JI l7l (ISO8846 ignition protected), ABYC A-31, UL (incl. marine supplement FCC class B)
CE、E-mark(95/54/EG)、SAE JI l7l(ISO8846点火防护)、ABYC A-31、UL(含船用补充标准FCC class B)


Technical specifications
技术规格

Charge characteristic充电特性IUoUo, automatic / 3-step+ for gel/AGM/wet/Lithium Ion
IUoUo,自动/3步+适用于凝胶/AGM/湿式/锂离子

Charge voltage Bulk充电电压 Bulk14.4 V
Charge voltage Absorption
充电电压 吸收
14.25 V
Absorption time吸收时间4 hours4小时
Charge voltage Float (wet batteries)
充电电压 浮充(湿电池)
13.25 V
Charge voltage Float (Gel/AGM batteries)
充电电压 浮充(胶体/AGM电池)
13.8 V
Temperature compensation
温度补偿
-22 mV/ °C-22 毫伏/摄氏度
-12 mV/ °F-12 毫伏/华氏度

DC voltage compensationDC电压补偿automatic
Power consumption (DC side)
功耗(DC侧)
< 5 mA
Full load consumption (230 V AC)
满载功耗(230 V AC)
700 W
Current Control function
当前读档功能
no不
Power factor control功率因数控制> 0.98>0.98
Temperature range (ambient temp.)
温度范围(环境温度)
-25 °C to 70
-25 °C 至 70

Cooling冷却vario fan
Protection degree防护等级IP23
Protections防护over temperature, over load, short circuit, high/low battery voltage
过热,过读档,短路,电池电压过高/过低

MasterBus compatibleMasterBus兼容no不
Charger Status Interface (alarm contact)
充电器状态接口(报警触点)
yes, using a Multipurpose Contact Output (code 77030500)
是的,使用多性向Contact Output(代码 77030500)


展开全文
拨打电话 微信咨询 发送询价
免责声明:商铺内信息由银杉电源设备(北京)有限公司发布提供和承担责任,谨防网络诈骗,不要付款给个人 信息有误或侵权请联系